The sensor is made of alloy steel or stainless steel, featuring a circular gasket structure and planar pressure bearing.
It is produced by introducing raw materials from the United States and the proprietary processing technology of the American BEAN Company.
It is mainly applicable to the force measurement in various bolts, shafts or force measuring machines and other equipment, and is also used for the tension and pressure testing of screws and members.
The sensor is made of alloy steel or stainless steel, featuring a circular gasket structure and planar pressure bearing.
It is produced by introducing raw materials from the United States and the proprietary processing technology of the American BEAN Company.
It is mainly applicable to the force measurement in various bolts, shafts or force measuring machines and other equipment, and is also used for the tension and pressure testing of screws and members.
Circuit Diagram：
Red: ＋input
Blue： -input
White： +output
Yellow： -output
| Type | Technical parameters |
| Nominal load range | 1～5t |
| Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog output | 2.0±0.015mV/V |
| Input resistance（Rlc） | 780±20Ω（ohms） |
| Output resistance（Ro） | 700±5Ω（ohms） |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Class precision | 0.1%FS |
| Effect of temperature | 0.1%FS/10℃ |
| Operating temperature | -40～+85℃ |
| Safe Load Limit | 200% FS |
| Safety margin against yielding | 300% FS |
| Safety margin against breakage | 500% FS |
| Material material | High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection type | IP67 |
Get In Touch With Us !
partner
partner
download
