The SM46E pull force sensor adopts an alloy steel structure, which is simple and has strong resistance to eccentric loading. Waterproof, high measurement accuracy, stable and reliable performance and easy to install. It is widely used in force measurement and weighing systems of various cement silos, belt scales, hopper scales, dry-mixed mortar, oil tanks and various engineering devices, etc.
télécharger
Description
The SM46E pull force sensor adopts an alloy steel structure, which is simple and has strong resistance to eccentric loading. Waterproof, high measurement accuracy, stable and reliable performance and easy to install. It is widely used in force measurement and weighing systems of various cement silos, belt scales, hopper scales, dry-mixed mortar, oil tanks and various engineering devices, etc.
Caractéristiques
- Simple structure.
- Strong resistance to eccentric loading.
- High measurement accuracy.
- Stable performance.
Dimensions(En mm. 1 mm = 0,03937 pouce)
Schéma de circuit :
Rouge : + entrée
Bleu : -entrée
Blanc : + sortie
Jaune : -sortie
Spécification:
| Taper | Paramètres techniques |
| Plage de charge nominale | 5～30t |
| Alimentation électrique | 10 à 12 V CC |
| Courant de tirage | <100 mA |
| Solde nul | 1,0±% de la puissance de sortie nominale |
| Sortie analogique | 2,0±0,015 mV/V |
| Résistance d'entrée (Rlc) | 380±10Ω (ohms) |
| Résistance de sortie (Ro) | 350±5Ω (ohms) |
| Résistance d'isolement | ≥ 5000 MΩ (Méga-Ohms) |
| Précision de la classe | 0,3%FS |
| Effet de la température | 0,3%FS/10℃ |
| Température de fonctionnement | -40～+85℃ |
| Limite de charge sécuritaire | 200% FS |
| Marge de sécurité contre le rendement | 300% FS |
| Marge de sécurité contre la casse | 500% FS |
| Matériau Matériau | Acier allié haute performance ou acier inoxydable (taux de chrome>15%) |
| Type de protection | IP67/IP68 |
Contactez-nous !
partenaire
partenaire
