The SM46F pull force sensors are specifically designed for measuring various large-range static or dynamic tensile forces. Especially when the harsh on-site working environment has high requirements for durability and technical reliability, the SM46F pull force sensor is the best choice. It can be designed according to general standards and non-standard customized designs to meet the needs of various application scenarios. For example: hook scales, lifting overload protection equipment, etc.
If the machinery has special shape or interface requirements for the tensile force sensor, our company can specially design and customize it according to the requirements.The SM46F pull force sensors are all equipped with standard current interfaces, CAN bus interfaces or wireless sensor network interfaces.
Perceive the world Connect the world Innovate the SUNMOON
Description
The SM46F pull force sensors are specifically designed for measuring various large-range static or dynamic tensile forces. Especially when the harsh on-site working environment has high requirements for durability and technical reliability, the SM46F pull force sensor is the best choice. It can be designed according to general standards and non-standard customized designs to meet the needs of various application scenarios. For example: hook scales, lifting overload protection equipment, etc.
If the machinery has special shape or interface requirements for the tensile force sensor, our company can specially design and customize it according to the requirements.The SM46F pull force sensors are all equipped with standard current interfaces, CAN bus interfaces or wireless sensor network interfaces.
Characteristics
The tensile force measurement range is selectable from 1t to 25t.
High reliability.
Multiple measurement signal output schemes: analog standard signal, digital bus, wireless sensor network.
Accuracy grade 0.3
The material of the measurement body adopts high-performance alloy steel or stainless steel.
Measure the safe overload range of the body at 200% F·S.
Industrial-grade design, protection class IP67.
The operating temperature range: -40℃ to 85℃.
ESD electrostatic protection, EFT transient suppression SPD surge impact protection.
Reverse polarity protection for power supply and signals, external steel connector protective cover.
Dimensions（In mm. 1mm=0.03937 inches）
Circuit Diagram：
Red: ＋input
Blue： -input
White： +output
Yellow： -output
Specification：
Type
Technical parameters
Nominal load range
5～20t
Power supply
10~12 VDC
Drawing current
<100 mA
Zero balance
1.0±% of rated output
Analog output
2.0±0.015mV/V
Input resistance（Rlc）
380±10Ω（ohms）
Output resistance（Ro）
350±5Ω（ohms）
Insulation resistance
≥5000 MΩ（Mege-Ohms）
Class precision
0.3%FS
Effect of temperature
0.3%FS/10℃
Operating temperature
-40～+85℃
Safe Load Limit
200% FS
Safety margin against yielding
300% FS
Safety margin against breakage
500% FS
Material material
High performance alloy steel or (chromium ratio>15% stainless steel)
download
